|
SanoVerde
Deep Scrub
SanoVerde® Deep Scrub & Stripper is an aggressive, non-ammoniated,
emulsifying stripper that is concentrated, fast acting and very low
in odor. It has superior stripping efficiency that translates into
real labor cost savings. SanoVerde® Deep Scrub & Stripper
is especially designed to remove SanoVerde® Floor Finish and has
been rated excellent in independent testing according to ASTM D-1792.
Use SanoVerde® Deep Scrub & Stripper and SanoVerde® Floor Finish
as part of the scrub and re-coat SanoVerde® no-strip program to keep
floors looking new.
|
How to use: DEEP
SCRUB BEFORE RE-COATING:1. Dilute SanoVerde® Deep Scrub & Stripper
2 ounces per gallon of water.
2. Apply diluted SanoVerde® Deep
Scrub & Stripper solution to the floor so
it covers approximately 100 square feet. Apply enough stripper solution
to insure
complete wetting.
3. Immediately scrub with low speed machine.
4. DO
NOT ALLOW SOLUTION TO DRY. For best results, wet vac residue. If not
possible, use a damp mop for recovery. 5. Rinse thoroughly with clean
water before re-coating with SanoVerde® Floor Finish.
|
|
Companion Products:
Floor Finish, Floor Cleaner, Floor Restorer Liquid, Floor Restorer Gel
For building maintenance: e-clean Restroom Cleaner, Glass Cleaner, Carpet Cleaner,
Spot Cleaner
HDMI rating H2, F0, R0, PB
Packaged in 4/1 gallons
Click here for product specs & MSDS |
| |
|
|
"Clean right to get green"
E-Clean Products cover all your maintenance needs from
floor care to carpet care and washroom maintenance with both a environmentally
preferable product as well as environmentally preferable packaging.
