Floor Finish

The foundation of any floor care program, e-clean Floor Finish is a non heavy metal, state of the art polymer blend that dries to a high initial gloss and holds up under heavy traffic.

Use with the companion e-clean Dri-buffer and Floor Cleaner to have a safe, clean floor surface.

Use the links to the right to look at other product info.

How to use::
May be applied over other hard, non-wax finishes. But for assured results, the old brand of polish should be removed, and the new finish applied to a clean, dry floor.
1. Apply finish in straight, even strokes that will cover fully, but not so liberally as to run into spots.
2. Allow to dry completely. Do not re-work finish while it is drying.
3. When dry, an additional coat, or coats, may be applied if needed. Apply each succeeding coat a little less liberally than the previous one.
Note: To remove our floor finish use Green seal Certified Stripper.

   Companion Products:
Floor Cleaner, Dri-Buffer and Dust Mop Treatment

For building maintenance: Restroom Cleaner, Glass Cleaner, Carpet Cleaner, Spot Cleaner
HDMI rating H2, F0, R0, PB

Packaged in 4/1 gallons, 2.5 gallon BIB
     

"Clean right to get green"

E-Clean Products cover all your maintenance needs from floor care to carpet care and washroom maintenance with both a environmentally preferable product as well as environmentally preferable packaging.